Fiber optic cable is substituting the copper cable for communication. One primary purpose of using the fiber optic cable is that it covers a vast distance of phone systems and network platforms, for example, school campuses and office buildings and industrial plants, and electric power agencies.  Additionally, current fiberoptic cable is capable of operating at an astonishing speed to fulfill the ever-growing requirements of infrastructure.  In today’s blog, we’re getting to exemplify the fiber optic cable speed, that includes single mode fiber and multimode fiber speeds too. 

Fiber optic cable contains strands of optically pure glasses. These strands of glass are thinner than a human hair and can convey electronic data over a far distance. Digital signals are sent as pulses of light without any hindrance or limit.  In this manner, the electronic transfer process is faster and much more reliable.  Fiber-optic technology enables more data to be moved in a shorter period compared to old net technologies, such as cable and DSL.  For online users, the higher data speed will cause faster fiber-optic cable rate, higher-quality loading, and also a better experience.

Fiber optic link comes in two kinds: single mode fiber and multimode fiber. Under these two sorts, there are many sub-branches; for example, the single mode LC fiber is used for long-distance transmission and the multimode LC fiber for short distance transmission. In any case, for various sorts of cables, they have relating fiber optic link speed also.

The speed of Single Optic Fiber Cable:

Single core Optic cable is one strand of glass fiber with a moderately thin diameter, roughly 8.3 to 10 microns.  Usually, it’s just one mode of transmission which spreads in the wavelength of 1310nm and 1550nm.  On this account, there’ll be minimal light reflection once the light moves through the mode fiber center.  As a result, it is going to decrease fiber attenuation and boost the rate for its transmitting signs. For single mode fiberoptic cable speed, regardless of information rate is at 100 Mbit/s or Gbit/s, the transmission separation can reach up to 5 km. It is typically utilized for long separation flag transmission.

The speed of Multi-Mode Optic Fiber Cable:

Multimode fiber is made of glass fiber with a diameter of 50 to 100 microns. With multicenter, it might direct many ways simultaneously. Thus, giving rise to the data transit during the multi-mode fiber center. Also, it will bring higher light reflection, scattering, and attenuation rates. Multimode fiber gives higher transmission capacity at higher fiber optic Cable speed. It is for the most part utilized for short distance communication, for example, within premises or on grounds. Commonly, the multimode fiber optic speed and the transmitting distance limits are 100 Mbit/s for distance up to 2 km (100BASE-FX), Gbit/s up to 1000m, and 10 Gbit/s up to 550 m.

According to your needs, you can choose any of these fiber optic cable. At Connect Zone, we can create or customize any cable as per your requirement and needs. We offer a wide range of Cisco cable with a lifetime guarantee at a very affordable price. So, for any needs related to cables, cords, and accessories, contact ConnectZone, your cable expert!


Dann Oberholtzer

Dann "The Cable Man" Oberholtzer has been in the cable, Fiber Optic business Since the early 1980's that is over 30 years of experience !

Leave a Reply

Your email address will not be published. Required fields are marked *